All trailers include:

  • All ICC road lights

  • 12 Volt connector complete for trailer and for towing vehicle

  • Break-a-way kit complete and installed

  • 4 wheel electric brakes with electronic brake control

  • Permanent Hitch coupler and ball that matches coupler

  • Hitch jack with jack foot

  • Safety chain

  • Painted steel treadplate floor (Can upgrade to aluminum)

  • Roof sealed and insulated

  • Outside fold down stainless steel serving counters for all service openings

  • Undercoated with rust prohibitive black primer

  • Inside and outside painted with DuPont™ Centari™ paint

  • Sweep out door in floor for easy clean up

Series 1, 2 and 3 10’ and 12’ trailers:

Mounted on 7,000# tandem Torflex axle assembly with ST175 / 80R 13 (13” radial) tires and have 2” coupler and ball.

Series 3- 14’ trailers:

Mounted on 7,000# tandem Torflex axle assembly with ST 205 / 75R14 (14” radial) tires and has 2 5/16” coupler and ball.

Series 3 - 16’ trailers:

Mounted pm 10,400# Tandem Torflex axle assembly with 8.75 x 16.5 bias tires and has 2 5/16” coupler and ball.

Series 5 - 14’ & 16’ trailers:

Mounted on 10,400# Torflex axle assembly with 8.75 x 16.5 bias ply tires.

Series 5 - 18’ & 20’ trailers:

Include 12,000# Torflex assembly and 9.50 x 16.5 bias ply tires.

Series 5 and 6 trailer axle assemblies vary according to equipment and trailer sizes.

**Note: Series 4,5 & 6 trailers have all basic body equipment and include overhead storage shelves on two sides and one end of trailer, (2) raise up roof vents and wheel skirts.

Basic 50 amp 110V wiring includes:

SIX circuit breaker box with 50 amp main breaker, (2) 20 amp breakers, (1) 15 amp breaker, (2) rows of double tube single pin flourescent fixtures with tubes, 50 amp twist lock connector for trailer and for cable.  Included with 10, 12, 14 & 16 Series 1,2,3 & 4 model trailers.

Basic 100 amp 220V wiring includes:

TWELVE circuit breaker box with 100 amp main breaker, (12) 15-20 amp breakers, two rows of double tube single pin flourescent fixtures with tubes, double receptacles underneath counters and in overhead storage shelves, Cam-Lok™ connectors for trailer body mounted in recessed locking compartment and Cam-Lok™ connectors for cable.  Included with all Series 5 & 6 trailer.

Frame made from standard steel tubing.  Body panels are Galvanneal Steel.  Awnings made from aluminum.

 

Price List | Options & Prices